5-16
Operation on the Machine > Frequently-Used Sending Method
Sending to a Shared Folder on a Computer [SMB]
You can store the scanned document into the desired shared folder on a computer.
1
[Home] key > [Send]
2
Place the originals.
Place the Originals. (5-3)
3
On the basic screen for sending, select [Folder].
4
For the folder type, select [SMB].
5
Select the folder specification method.
To search for a folder on a PC on the network and add it, select [Search Folder from Network] or [Search Folder
by Host Name].
If you pressed "Search Folder from Network", you can search all PCs on the network for a destination.
If you selected "Search Folder by Host Name", you can enter the "Domain/Workgroup", and "Host Name" to
search PCs on the network for the destination.
Up to 500 addresses can be displayed. Select the host name (PC name) that you want to specify in the screen
that appears, and select [Next >]. The login user name and login password entry screen appears.
After you enter the login user name and login password name of the destination PC, the shared folders appear.
Select the folder that you want to specify and select [Next >]. The address of the selected shared folder is set.
Select the folder from the Search Results list.
Before sending a document, configure the following settings.
Making a note of the computer name and full computer name
Making a note of the computer name and full computer name (3-22)
Making a note of the user name and domain name
Making a note of the user name and domain name
(3-23)
Creating a shared folder, making a note of a shared folder
Creating a Shared Folder, Making a Note of a Shared Folder
(3-24)
Configure the Windows firewall
Configuring Windows Firewall Settings
(3-28)
To Next Page
Loading...
Need help?
General
