5-17
Operation on the Machine > Frequently-Used Sending Method
6
Enter the destination information.
Enter the SMB destination information. After you have completed entry of one item, select [Next >] to advance to
the next item.
Character Entry Method (12-11)
The table below explains the items to be entered.
*1 You can also specify the port number. Enter the following format separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:445)
If the port number is not specified in [Host Name], the default port number is 445.
7
Check the status.
1 Check the information.
Change if needed.
2 [Menu] > [Connection Test]
The message "Connected." appears when connection with the destination is correctly established. If "Cannot connect."
appears, check the information you entered.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the address book by selecting [Add Address Book].
8
Select [OK].
Destinations can be changed later.
Checking and Editing Destinations (5-30)
9
Selecting the functions.
Selecting [Functions] displays a list of functions.
[Send]
(xii)
10
Press the [Start] key.
Start sending.
Description Description Max. No. of
Characters
Host Name
*1
Computer name 64 characters
Path Share name
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
128 characters
Login User Name If the computer name and domain name are the same:
User Name:
For example: james.smith
If the computer name and domain name are different:
Domain name\User name
For example:abcdnet\yamada
64 characters
Login Password Windows login password
(Case sensitive.)
64 characters
To Next Page
Loading...
