2-37
Installing and Setting up the Machine > Installing Software
Setting TWAIN Driver
Instructions are based on interface elements as they appear in Windows 8.1.
1
Display the screen.
1 Click [Search] in charms, and enter "TWAIN Driver Setting" in the search box. Select [TWAIN Driver Setting] in
the search list. TWAIN Driver setting screen appears.
2 Click [Add].
2
Configure the settings.
In Windows 7, select [Start] button on the Windows, [All Programs], [Kyocera] and then [TWAIN Driver Setting].
1 Enter the machine name.
2 Select this machine from the list.
3 Enter the machine IP addresses or host name.
4 Set units of measurement.
5 When using SSL, select the checkbox beside SSL.
6 Click [OK].
When the machine's IP address or host name is unknown, contact Administrator.
To Next Page
Loading...
