2-43
Installing and Setting up the Machine > Command Center RX
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Wired Network]
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well as the current status of the
machine.
2
Configure the function.
Select a category from the navigation bar on the left of the screen.
Changing Security Settings
1
Display the screen.
1 Launch your Web browser.
If the screen "There is a problem with this website's security certificate." is displayed, configure the certificate.
Command Center RX User Guide
You can also continue the operation without configuring the certificate.
To fully access the features of the Command Center RX pages, enter the User Name and Password to login.
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with
administrator privileges is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
To Next Page
Loading...
Need help?
General
