8-58
System Menu > [Date/Timer/Energy Saver]
[Date/Timer/Energy Saver]
Menu Transition: [System Menu / Counter] key > [Date/Timer/Energy Saver] Configure date and time settings.
Item Description
Date/Time Set the date and time for the location where you use the machine. If you perform Send
as E-mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00
to 59), Second (00 to 59)
Setting Date and Time (2-12)
If you change the date/time while using the trial version of an application, you will no
longer be able to use the application.
Date Format Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list. If you
select a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (2-12)
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
Refer to the following for the time until reset.
Panel Reset Timer (8-58)
Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [Auto Panel Reset] is set to [On].
Low Power Timer Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 60 minutes (1 minute increments)
Except for Europe 1 to 240 minutes (1 minute increments)
Low Power Mode (2-22)
Sleep Rules (models for
Europe)
*1
Select whether to use the Sleep mode for the following functions individually:
• Card Reader
*2
•FAX
*3
• Application
Value: Off, On
If the sleep condition is not turned off, the ID card cannot be recognized.
To Next Page
Loading...
Need help?
General
