5-19
Operation on the Machine > Frequently-Used Sending Method
6
Check the status.
1 Check the information.
Change if needed.
2 [Menu] > [Connection Test]
The message "Connected" appears when connection with the destination is correctly established. screen appears. If
"Cannot connect" appears, check the information you entered.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the Address Book by selecting [Add Address Book].
7
Select [OK].
Destinations can be changed later.
Checking and Editing Destinations (5-30)
8
Selecting the functions.
Selecting [Functions] displays a list of other functions.
[Send]
(xii)
9
Press the [Start] key.
Start sending.
Scanning with a TWAIN/WIA Compatible Application
This section explains how to scan an original using TWAIN or WIA.
1
Display the screen.
1 Start up the TWAIN or WIA compatible application.
2 Select the machine using the application and display the dialog box.
2
Configure the settings.
Select scanning settings in the dialog box that opens.
Before sending a document, confirm that TWAIN/WIA driver is installed on a computer and the settings are
configured.
Setting TWAIN Driver (2-37)
Setting WIA Driver (2-39)
For selecting the machine, see the Operation Guide or Help for each application software.
For the settings, refer to Help in the dialog box.
To Next Page
Loading...
Need help?
General
