5-48
Operation on the Machine > Operating Using Removable USB Memory
2
Plug the USB memory.
1 Plug the USB memory into the USB Memory Slot.
2 When the machine reads the USB memory, "Removable Memory is recognized. Displaying files. Are you
sure?" may appear. Select [Yes].
This displays the Removable Memory screen.
3
Store the forms.
1 Select the folder where the file will be stored.
The machine will display the top 3 folder levels, including the root folder.
2 Select [ ].
3 Set the type of original, file format, etc., as desired.
For the features that can be set, refer to the following:
[Store File] (xvii)
4 Press the [Start] key.
The original is scanned and the data is stored in the USB memory.
Check the USB Memory Information
1
In the removable memory screen, select [Memory Information].
2
Once you confirm the information, select [Close].
Removing USB Memory
1
Display the screen.
[Home] key > [Removable Memory]
If the message does not appear, select [Removable Memory] on the Home screen.
Be sure to follow the proper procedure to avoid damaging the data or USB memory.
To Next Page
Loading...
Need help?
General
