3-30
Preparation before Use > Preparation for Sending a Document to a Shared Folder in a PC
5 Select [TCP] as the port to apply the rule to. Then select [Specific local ports] and enter "445" then click [Next].
6 Select [Allow the connection] and click the [Next] button.
7 Make sure all checkboxes are selected and click the [Next] button.
In Windows Vista, use "Name" to assign a name to the port to be added (Example: Scan to SMB). Enter "445"
in "Port Number". Select [TCP] for "Protocol". After settings are the way you want, click the [OK] button.
To Next Page
Loading...
