6-6
Advanced Setting of Functions > [Paper Selection]
The available paper sizes and media types are shown in the table below.
*1 The input units can be changed in System Menu.
[Measurement] (8-20)
*2 For instructions on how to specify the custom paper types 1 to 8, refer to the following:
Media Type Setting (8-14)
To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action (8-14)
Item Value Description
Paper Size Inch Ledger, Letter-R, Letter, Legal, Statement-R, Executive,
Oficio II
Select from the Inch series
standard sizes.
Metric A3, A4-R, A4, A5-R, A6-R, B4, B5-R, B5, B6-R, Folio,
216 x 340mm
Select from the Metric series
standard sizes.
Others ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Envelope
C4, Hagaki (Cardstock), Oufuku Hagaki (Return postcard),
Youkei 4, Youkei 2, 8K, 16K-R, 16K
Select from special standard
sizes and custom sizes.
Size Entry Metric
X: 148 to 432 mm (in 1 mm increments)
Y: 98 to 297 mm (in 1 mm increments)
Enter the size not included in the
standard size.
*1
When you have selected [Size
Entry], use [+]/[-] or the numeric
keys to set the sizes of "X"
(horizontal) and "Y" (vertical).
Select [# Keys] to use the
numeric keys for entry.
Inch
X: 5.83 to 17.00" (in 0.01" increments)
Y: 3.86 to 11.69" (in 0.01" increments)
Media type Plain (60 to 105 g/m
2
), Transparency, Vellum (59 g/m
2
or less), Labels, Recycled, Preprinted
*2
,
Bond, Cardstock, Color, Prepunched
*2
, Letterhead
*2
, Envelope,Thick (106 g/m
2
or more),
Coated, High Quality, Custom 1-8
*2
When paper size and the media type for MP tray is specified, [Media Type] is selected. Note that if
[Multipurpose Tray] is pressed at this point, the settings will be canceled.
• You can conveniently select in advance the size and type of paper that will be used often and set them as
default.
[Multi Purpose Tray] (8-10)
• If the specified size of paper is not loaded in the paper source cassette or multi purpose tray, a confirmation
screen appears. Load the required paper in the multi purpose tray and select [Continue]. Copying starts.
To Next Page
Loading...
Need help?
General
