8-35
System Menu > [System/Network]
[Wi-Fi Settings]
Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Wi-Fi Settings]
Configure Wi-Fi settings.
[Wi-Fi]
[Setup]
This function is displayed when the Wireless Network Interface Kit (IB-36) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-36 <Wireless Network Interface Kit> (12-3)
Item Description
Wi-Fi Select whether to use Wi-Fi.
Value: Off, On
Item Description
Connection Status This can be used to check the wireless LAN status.
Quick Setup If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Available Network Displays access points to which the machine can connect. Select a desired access
point from the list.
WEP Key Index Select the key index value that is set on the access point.
Value: 0 to 3
Push Button Method If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
Custom Setup The detailed settings for wireless LAN can be changed.
To Next Page
Loading...
Need help?
General
