Kyocera Ecosys M812cidn

8-44
System Menu > [System/Network]
Item Description
HTTP ―
Protocol Settings Select whether to communicate using HTTP.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)
HTTPS ―
Protocol Settings Select whether to communicate using HTTPS.
*1*2
Value: Off, On
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)
IPP ―
Protocol Settings Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to [On],
and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] for the security settings
from Command Center RX.
*1
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is
the self-certificate of the machine.
Direct SMTP Port
Number
Specifies the port number used. The default port number is 631.
Value: 1 to 32767
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)