liii
> About the Operation Guide (this Guide)
Conventions used in procedures for operating the machine
In this Operation Guide, continuous operation of the keys on the touch panel is as follows:
Size and Orientation of Originals and Paper
Original sizes and paper sizes such as A4, B5, and Letter can be used in both the horizontal and vertical orientations. To
distinguish the orientations when these sizes are used, "R" is added to sizes used in the horizontal orientation. In
addition, the following icons are used to indicate original and paper placement orientations on the touch panel.
*1Original/paper sizes that can be used vary depending on the function and source tray. For details, refer to the following:
Machine (12-21)
Actual procedure Procedure indicated in this guide
Press the [System Menu / Counter] key
Select [ ]
Select [Common Settings]
Select [Sound]
[System Menu / Counter] key > [Common Settings] >
[Sound]
Orientation Setting Position
(X=Length, Y=Width)
Icons on the touch
panel
Indicated size in this
Guide*¹
Vertical Original A4, B5, Letter
Paper
Horizontal Original A4-R, B5-R, Letter-R
Paper
To Next Page
Loading...
