Lenze i510 - Acyclic Data Exchange

8.3 Acyclic data exchange
The acyclic data exchange is normally used for transming parameter data the transmission
of which is not me-crical. Such parameter data are for example operang parameters,
motor data, and diagnosc informaon.
De
tails
•
The acyclic data ex
change enables access to all parameters of the inverter.
•
For all communicaon protocols except Modbus, the parameter is addressed directly via the
index and subindex.
•
The paramet
er aribute list contains a list of all inverter parameters. This list in parcular
includes some informaon that is relevant to the reading and wring of parameters via the
network. 4Parameter aribute list^ 229
Conguring the network
Acyclic data ex
change
111
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com