Lenze i510 - Reset Error

11.4 Reset error
By means of the "Reset error" funcon, an acve error can be reset (acknowledged).
Precondions
The error can only be reset if the error cause has been eliminated.
Parameter Name / value range / [default seng] Info
0x2631:004
(PAR 400/004)
Funcon assignment: Reset err
or
(Funcon list: Reset error)
•
For possible sengs see descripon for
0x2631:001 (PAR 400/001). ^ 188
Assignment of a trigger for the "Reset error" funcon.
Trigger = FALSE-TRUE edge: acve error is reset (acknowledged) if the
error cause has been eliminated.
Trigger = FALSE: no acon.
Notes:
•
Aer reseng the error, a new enable/start command is required to
restart the drive.
12 Digital input 2 State of X3/DI2, taking an inversion set in 0x2632:002 (PAR 411/002) into
consideraon.
Flexible I/O conguraon
Reset error
201
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com