Lenze i510 - Configuration of Digital Outputs; Relay

11.14 Conguraon of digital outputs
11.14.1 Relay
Sengs for the r
elay.
Parameter Name / value range / [default seng] Info
0x2634:001
(PAR 420/001)
Funcon assignment of digital outputs: R
elay
(Digital outputs: Relay funcon)
Assignment of a trigger to the relay.
Trigger = FALSE: X9/NO-COM open and NC-COM closed.
Trigger = TRUE: X9/NO-COM closed and NC-COM open.
Notes:
•
An inversion set in 0x2635:001 (PAR 421/001)is taken into considera-
on here.
0 Not connected No trigger assigned (bit is constantly "0").
1 Constant TRUE Bit is constantly "1".
11 Digital input 1 State of X3/DI1, taking an inversion set in 0x2632:001 (PAR 411/001) into
consideraon.
12 Digital input 2 State of X3/DI2, taking an inversion set in 0x2632:002 (PAR 411/002) into
consideraon.
13 Digital input 3 State of X3/DI3, taking an inversion set in 0x2632:003 (PAR 411/003) into
consideraon.
14 Digital input 4 State of X3/DI4, taking an inversion set in 0x2632:004 (PAR 411/004) into
consideraon.
15 Digital input 5 State of X3/DI5, taking an inversion set in 0x2632:005 (PAR 411/005) into
consideraon.
16 Digital input 6 State of X3/DI6, taking an inversion set in into consideraon.
17 Digital input 7 State of X3/DI7, taking an inversion set in into consideraon.
34 NETWordIN2 - bit 0 State of NetWordIN2/bit 0.
•
Display of NetWordIN2 in 0x4008:002 (PAR 590/002).
•
For controlling the digital outputs via network, NetWordIN2 can be
mapped to a process data input word.
35 NETWordIN2 - bit 1 State of NetWordIN2/bit 1.
36 NETWordIN2 - bit 2 State of NetWordIN2/bit 2.
37 NETWordIN2 - bit 3 State of NetWordIN2/bit 3.
38 NETWordIN2 - bit 4 State of NetWordIN2/bit 4.
39 NETWordIN2 - bit 5 State of NetWordIN2/bit 5.
40 NETWordIN2 - bit 6 State of NetWordIN2/bit 6.
41 NETWordIN2 - bit 7 State of NetWordIN2/bit 7.
42 NETWordIN2 - bit 8 State of NetWordIN2/bit 8.
43 NETWordIN2 - bit 9 State of NetWordIN2/bit 9.
44 NETWordIN2 - bit 10 State of NetWordIN2/bit 10.
45 NETWordIN2 - bit 11 State of NetWordIN2/bit 11.
46 NETWordIN2 - bit 12 State of NetWordIN2/bit 12.
47 NETWordIN2 - bit 13 State of NetWordIN2/bit 13.
48 NETWordIN2 - bit 14 State of NetWordIN2/bit 14.
49 NETWordIN2 - bit 15 State of NetWordIN2/bit 15.
50 Running TRUE if motor is controlled (pulse width modulaon on). Otherwise
FALSE.
51 Ready for
operaon TRUE if operaon is enabled AND no error is acve. Otherwise FALSE.
52 Controller enable TRUE if inverter is not enabled OR stop command is acve and output
frequency = 0.
53 Stop acve TRUE if inverter is not enabled OR Stop command is acve and output
frequency = 0.
FALSE if inverter enabled OR quick stop acve OR fault acve OR output
frequency ≠ 0.
Flexible I/O conguraon
Conguraon of digital outputs
Relay
215
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com