Lenze i510 - Configuring the Favorites

No. Display Name Default seng Seng range Info
18 P304.00 Rotaon mode Forwards/backw. [1] Selecon list 0x283A (PAR 304)
19 P305.00 Swit
ching frequency 8kHz var/opt/4 [21] Selecon list 0x2939 (PAR 305)
20 P308.01 Load at 60 sec 150 % 30 ... 200 % 0x2D4B:001 (PAR 308/001)
21 P316.01 V/f boost: stat. 2.5 % 0.0 ... 20.0 % 0x2B12:001 (PAR 316/001)
22 P324.00 Max current 200.0 % 0.0 ... 3000.0 % 0x6073 (PAR 324)
23 P400.01 Controller enable TRUE [1] Selecon list 0x2631:001 (PAR 400/001)
24 P400.02 Start enable Digital input 1 [11] Selecon list 0x2631:002 (PAR 400/002)
25 P400.03 Quick stop Not connected [0] Selecon list 0x2631:003 (PAR 400/003)
26 P400.04 Reset error Digital input 2 [12] Selecon list 0x2631:004 (PAR 400/004)
27 P400.05 DC braking Not connected [0] Selecon list 0x2631:005 (PAR 400/005)
28 P400.06 Forward start Not connected [0] Selecon list 0x2631:006 (PAR 400/006)
29 P400.07 Backward start Not connected [0] Selecon list 0x2631:007 (PAR 400/007)
30 P400.08 Forward run Not connected [0] Selecon list 0x2631:008 (PAR 400/008)
31 P400.09 Backward run Not connected [0] Selecon list 0x2631:009 (PAR 400/009)
32 P400.13 Reversal of rot. dir. Digital input 3 [13] Selecon list 0x2631:013 (PAR 400/013)
33 P400.18 Preset b0 Digital input 4 [14] Selecon list 0x2631:018 (PAR 400/018)
34 P400.19 Preset b1 Digital input 5 [15] Selecon list 0x2631:019 (PAR 400/019)
35 P400.20 Preset b2 Not connected [0] Selecon list 0x2631:020 (PAR 400/020)
36 P420.01 Relay funcon Ready for operaon [51] Selecon list 0x2634:001 (PAR 420/001)
37 P420.02 DO1 funcon Release brake [115] Selecon list 0x2634:002 (PAR 420/002)
38 P430.01 AI1 cong. 0...10VDC [0] Selecon list 0x2636:001 (PAR 430/001)
39 P430.02 AI1 freq @ min 0.0 Hz -1000.0 ... 1000.0 Hz 0x2636:002 (PAR 430/002)
40 P430.03 AI1 freq @ max 50.0 Hz -1000.0 ... 1000.0 Hz 0x2636:003 (PAR 430/003)
41 P440.01 AO1 cong. 0...10VDC [1] Selecon list 0x2639:001 (PAR 440/001)
42 P440.02 AO1 funcon Actual outp. freq. [1] Selecon list 0x2639:002 (PAR 440/002)
43 P440.03 AO1 funct @ min 0 -2147483648 ... 2147483647 0x2639:003 (PAR 440/003)
44 P440.04 AO1 funct @ ma
x 1000 -2147483648 ... 2147483647 0x2639:004 (PAR 440/004)
45 P450.01 Preset value 1 20.0 Hz 0.0 ... 599.0 Hz 0x2911:001 (PAR 450/001)
46 P450.02 Preset value 2 40.0 Hz 0.0 ... 599.0 Hz 0x2911:002 (PAR 450/002)
47 P450.03 Preset value 3 50.0 Hz 0.0 ... 599.0 Hz 0x2911:003 (PAR 450/003)
48 P450.04 Preset value 4 0.0 Hz 0.0 ... 599.0 Hz 0x2911:004 (PAR 450/004)
49 - - - - not assigned
50 - - - - not assigned
10.7.3 Conguring the "Favorites"
The "Favorites" can be congured by the user.
Details
•
»E
ASY Starter« pr
ovides a user-friendly parameterisaon dialog for conguraon of the
"Favorites".
•
A ma
ximum number of 50 parameters can be dened as "Favorites".
Parameter Name / value range / [default seng] Info
0x261C:001
(P
AR 740/001)
F
a
v
orit
es sengs: Parameter 1
(Favorites se.: Favorites pos 1)
0x00000000 ... [0x2DDD0000] ... 0xFFFFFF00
Denion of the "Favorites" parameters.
•
Format: 0xiiiiss00 (iiii = hexadecimal index, ss = hexadecimal subindex)
•
The lowest byte is always 0x00.
•
Keypad format: Piii.ss (iii = decimal PAR number, ss = decimal subin-
dex)
0x261C:002
(PAR 740/002)
Favorites sengs: Parameter 2
(Favorites se.: Favorites pos 2)
0x00000000 ... [0x60780000] ... 0xFFFFFF00
0x261C:003
(PAR 740/003)
Favorites sengs: Parameter 3
(Favorites se.: Favorites pos 3)
0x00000000 ... [0x2D890000] ... 0xFFFFFF00
0x261C:004
(PAR 740/004)
Favorites sengs: Parameter 4
(Favorites se.: Favorites pos 4)
0x00000000 ... [0x603F0000] ... 0xFFFFFF00
Addional funcons
Favorit
es
Conguring the "Favorites"
163
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com