4.2 Operator-process interfaces
Commissioning the inverter requires an operator-process interface.
Keypad
The keypad is an easy means for the local operaon, parameterisaon, and diagnoscs of the
inverter.
•
The keypad is simply connected t
o the diagnosc interface on the front of the inverter.
•
The keypad can also be connect
ed and removed during operaon.
•
Detailed informaon about the parameterisaon by means of the ke
ypad can be found in
the "Changing the parameter sengs using the k
eypad" chapter. ^ 226
Lenze engineering tool »EASY Starter«
»EASY Starter« is a PC soware that is specially designed for the commissioning and mainte-
nance of Lenze devices.
Sample screenshot:
•
Communicaon with the inverter requires the USB module and a USB 2.0 cable (A-plug on
micr
o B-plug).
Commissioning
Oper
ator-pr
ocess interfaces
14
To Next Page
Loading...
