Lenze i510 - Favorites; Accessing the Favorites with the Keypad; Favorites Parameter List (Default Setting)

10.7 Favorites
In order to gain quick access using »EASY Starter« or the keypad, frequently used parameters
of the inverter can be
dened as "Favorites".
•
»EASY Starter« pr
ovides quick access to the "Favorites" via the Favorites tab.
•
On the keypad, the "Favorites" can be found in group 0.
10.7.1 Accessing the "Favorites" with the keypad
STOP
MAN AUTO SETLOC REM
50
MAN AUTO SETLOC REM
P220/000
GROUP 0
MAN AUTO SETLOC REM
Favorites
P100oo
MAN AUTO SETLOC REM
Actual frequency
80
MAN AUTO SETLOC REM
P220/000
1.
2.
3.
4.
5.
6.
VEL:FLEX:AIN1
s
s
P220oo
MAN AUTO SETLOC REM
Accel time 1
1.Use the key in the operang mode to naviga
te to the
parameterisaon mode one level below.
You are now in the group level. All parameters of the
inverter are divided into dierent groups according to
their funcon.
Group 0 contains the "Favorites".
Note: By using the
key you can navigate one level
upwards again anyme.
2.Use the key to navigate to one level below.
You are now in the parameter le
vel of the group selec-
ted.
3.Use the
and navigaon keys to select the desired
paramet
er.
4.Use the
key to navigate to one level below.
You are now in the eding mode.
5.Set the desir
ed value using the
and navigaon
keys.
6.Use the key to accept the changed seng.
The eding mode is exited.
Note: B
y using the
key you can exit the eding mode
without accepng the new seng (abort).
10.7.2 Fav
orites parameter list (default seng)
In the default seng, the most common parameters for the soluon of typical applicaons
are dened as "Favorites":
No. Display Name Default seng Seng range Info
1 P100.00 Actual frequency x.x Hz - (Read only) 0x2DDD (PAR 100)
2 P103.00 Motor curr
ent % x.x % - (Read only) 0x6078 (PAR 103)
3 P106.00 Motor voltage x VAC - (Read only) 0x2D89 (PAR 106)
4 P150.00 Acve error - - (Read only) 0x603F (PAR 150)
5 P200.00 Control source Terminal mode [0] Selecon list 0x2824 (PAR 200)
6 P201.01 Frequency setp. Analog input 1 [2] Selecon list 0x2860:001 (PAR 201/001)
7 P203.01 Start method Normal [0] Selecon list 0x2838:001 (PAR 203/001)
8 P203.03 Stop method Standard Ramp [1] Selecon list 0x2838:003 (PAR 203/003)
9 P208.01 AC input volt. 230 Ve [0] Selecon list 0x2540:001 (PAR 208/001)
10 P210.00 Min. frequency 0.0 Hz 0.0 ... 599.0 Hz 0x2915 (PAR 210)
11 P211.00 Max. frequency 50.0 Hz 0.0 ... 599.0 Hz 0x2916 (PAR 211)
12 P220.00 Acceleraon me 1 5.0 s 0.0 ... 3600.0 s 0x2917 (PAR 220)
13 P221.00 Deceleraon me 1 5.0 s 0.0 ... 3600.0 s 0x2918 (PAR 221)
14 P300.00 Motor ctrl mode VFC open loop [6] Selecon list 0x2C00 (PAR 300)
15 P302.00 V/f curve Linear [0] Selecon list 0x2B00 (PAR 302)
16 P303.01 Base voltage 230 V 0 ... 5000 V 0x2B01:001 (PAR 303/001)
17 P303.02 Base frequency 50 Hz 0 ... 599 Hz 0x2B01:002 (PAR 303/002)
Addional funcons
Favorit
es
Accessing the "Favorites" with the keypad
162
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com