Lenze i510 - Page 147

Parameter Name / value range / [default seng] Info
0x2022:004
(PAR 700/004)
Device commands: Load dat
a from the user memory
(Device commands: Load user data)
•
Seng can only be changed if controller inhibit is
acve.
1 = load data from the main memory of the memory module to the RAM
memory of the inverter.
•
Aer successful execuon, the value 0 is shown.
0 O / ready Only status feedback.
1 On / start Execute device command.
2 In progress Only status feedback.
3 Acon cancelled
4 No access
5 No access (controller inhibit)
0x2022:005
(PAR 700/005)
Device commands: Load data from the OEM memory
(Device commands: Load OEM data)
•
Seng can only be changed if controller inhibit is
acve.
1 = load data from the OEM memory of the memory module to the RAM
memory of the inverter.
•
Aer successful execuon, the value 0 is shown.
0 O / ready Only status feedback.
1 On / start Execute device command.
2 In progress Only status feedback.
3 Acon cancelled
4 No access
5 No access (controller inhibit)
0x2022:006
(PAR 700/006)
Device commands: Save data in the OEM memory
(Device commands: Save OEM data)
1 = save current parameter sengs in the OEM memory of the memory
module with mains failure protecon.
•
At the same me, the parameter sengs ar
e saved in the main mem-
ory of the memory module.
•
Aer successful execuon, the value 0 is sho
wn.
0 O / ready Only status feedback.
1 On / start Execute device command.
2 In progress Only status feedback.
3 Acon cancelled
4 No access
5 No access (controller inhibit)
0x2829
(PAR 732)
Automac storag
e in the memory module
(Autom. EPM data)
1 = acvate automac saving of parameters in the memory module.
•
With the seng 0, the "Save data in the user memory" 0x2022:003
(PAR 700/003) device command must be explicitly executed, or the
"Enter" keypad key must be pressed for longer than 3 s to save the
current parameter sengs in the memory module of the inverter
with mains failure protecon.
0 Inhibit
1 Enable
Addional funcons
Device Commands
Saving/loading the par
ameter sengs
147
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com