Lenze i510 - Page 7

11 Flexible I/O conguraon 186
11.1 Control source chang
e-over
187
11.2 Controller enable, starng & st
opping, reversal
188
11.3 Setpoint change-o
ver
193
11.3.1 Priority of the setpoint sources 193
11.3.2 Analog input setpoint source 193
11.3.3 Keypad setpoin
t source
194
11.3.4 Network setpoin
t source
194
11.3.5 Setpoint source of pr
eset setpoints
195
11.3.6 Motor potenometer setpoint sour
ce
198
11.4 Reset error 201
11.5 Acvang DC braking manually 202
11.6 Releasing holding brake manually 203
11.7 Acvang ramp 2 manually 204
11.8 Triggering a
user-dened fault
205
11.9 Funcons for parameter change-over 206
11.10 Process contr
oller funcon selecon
207
11.11 Frequency threshold for "Fr
equency threshold exceeded" trigger
209
11.12 Conguraon of digital inputs 210
11.13 Conguraon of analog inputs 211
11.13.1 Analog input 1 211
11.13.2 Analog input 2 213
11.14 Conguraon of digital outputs 215
11.14.1 Relay 215
11.14.2 Digital output 1 218
11.14.3 NETWordOUT1 st
atus word
218
11.15 Conguraon of analog outputs 221
11.15.1 Analog output 1 221
12 Technical dat
a
223
12.1 Standards and operang condions 223
12.2 Rated dat
a
225
12.2.1 Connecon to the 230 V system 225
12.2.2 Connecon to the 400 V system 225
13 Appendix 226
13.1 Changing the parameter
sengs using the keypad
226
13.2 Paramet
er aribute list
229
Contents
7
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com