User Guide Appendix A Installation
Rev. 1.30.03.07.r1 Page 227
8. The video card and CPU card have two holes. Use the small cable ties
provided to secure the two card together. This is important for consoles
that are frequently moved or toured.
On some early versions of the main CPU card the cable tie holes are
filled with solder. This can easily be melted away with a small soldering
iron. If you have question or need assistance call Field Service at
1-800-959-6004 for further instructions.
9. Double check installation.
10. Reposition bottom panel and re-attach screws and rubber feet.
11. Turn console over and reconnect power, control and video cables
CAUTION!
Modern electronics can sometimes be permanently
damaged by just a tiny amount of static electricity, an amount
much smaller than you can feel! To protect your console from
damage, it is recommended that you use a grounding wrist-
strap connected to the console chassis whenever you remove
the cover.
To Next Page
Loading...
