EasyManua.ls Logo

Lexmark MX912dxe - Replace Unsupported Cartridge [32.Xy]; Replace Unsupported Photoconductor [32.Xy]; Replace Waste Toner Bottle [82.Xy]; Restore Held Jobs

Lexmark MX912dxe
827 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or
visit
www.lexmark.com.
Replace unsupported photoconductor [32.xy]
Remove the photoconductor unit, and then install a supported one to clear the message and continue printing.
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.
Restore held jobs?
Try one or more of the following:
From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem persists. [840.02]
Try one or more of the following:
Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner maintenance required, use ADF Kit [80]
The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or contact your
service representative, and then report the message.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
7421
Diagnostic information
131

Table of Contents

Related product manuals