4 Remove the two screws, and then remove the motor.
1
2
# Part
1 Motor (3000-sheet tray transport)
2 Motor (3000-sheet tray feed)
3000-sheet tray feed roller assembly removal
1 Remove the left cover. See “3000-sheet tray left cover removal” on page 504.
2 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
3 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
4 Remove the front cover. See “3000-sheet tray front cover removal” on page 505.
5 Remove the left top cover. See “3000-sheet tray left top cover removal” on page 508.
6 Remove the motor bracket. See “Motor bracket removal” on page 519.
7421
Repair information
520
To Next Page
Loading...
