Motor (3000-sheet tray elevator) removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
3 Disconnect the cable (A).
4 Remove the three screws (B), and then remove the motor.
3000-sheet tray set sensor actuator removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
7421
Repair information
515
To Next Page
Loading...
