Lexmark MX912dxe - UI Automation; LES Applications; Key Repeat Initial Delay; Key Repeat Rate

UI Automation
This setting allows external developers to measure the stability of their applications by performing their own automated
testing against the printer.
1 Enter the Configuration menu, and then select UI Automation.
2 Select a setting.
3 Apply the changes.
LES Applications
This setting allows you to enable the Lexmark Embedded Solutions (LES) applications.
1 Enter the Configuration menu, and then select LES Applications.
2 Select a setting.
3 Apply the changes.
Key Repeat Initial Delay
This setting determines the length of delay before a repeating key starts repeating.
1 Enter the Configuration menu, and then select Key Repeat Initial Delay.
2 Select a setting.
3 Apply the changes.
Key Repeat Rate
This setting indicates the number of presses per second for a repeating key.
1 Enter the Configuration menu, and then select Key Repeat Rate.
2 Select a setting.
3 Apply the changes.
Clear Supply Usage History
This setting reverts the supply usage history (number of pages and days remaining) to its factory default settings.
1 Enter the Configuration menu, and then select Clear Supply Usage History.
2 Apply the changes.
Clear Custom Status
This setting erases the defined strings for the default or alternate custom messages.
1 Enter the Configuration menu, and then select Clear Custom Status.
2 Apply the changes.
7421
Service menus
235