3000-sheet tray elevator spring removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the front cover. See “3000-sheet tray front cover removal” on page 505.
3 Remove the spring (A).
A
3000-sheet tray controller board removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
3 Disconnect all the cables from the board.
7421
Repair information
513
To Next Page
Loading...
