11 From under the assembly, remove the two springs (E), and then remove the roller.
3000-sheet tray pick roller assembly removal
1 Remove the left cover. See “3000-sheet tray left cover removal” on page 504.
2 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
3 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
4 Remove the top door. See “3000-sheet tray door removal” on page 507.
5 Remove the left top cover. See “3000-sheet tray left top cover removal” on page 508.
6 Remove the motor bracket. See “Motor bracket removal” on page 519.
7 Remove the gear shaft (A).
7421
Repair information
523
To Next Page
Loading...
