13 Open the right door, and then remove the screw (H).
14 Remove the assembly.
Toner cartridge drive assembly removal
1 Remove the scanner interface cable cover. See “Scanner interface cable cover removal” on page 344.
2 Remove the controller board access cover. See “Controller board access cover removal” on page 345.
3 Remove the engine board cover. See “Engine board cover removal” on page 346.
4 Remove the upper rear cover. See “Upper rear cover removal” on page 346.
5 Remove the IHPS shield. See “IHPS shield removal” on page 347.
7421
Repair information
382
To Next Page
Loading...
