4 Disconnect the cable (C), and then remove the assembly.
Sensor (fuser exit) removal
1 Remove the duplex transport assembly. See “Duplex transport assembly removal” on page 285.
2 Remove the duplex transport diverter assembly. See “Duplex transport diverter assembly removal” on page 287.
3 Remove the sensor (A).
Fuser exit sensor actuator removal
1 Remove the duplex transport assembly. See “Duplex transport assembly removal” on page 285.
2 Remove the duplex transport diverter assembly. See “Duplex transport diverter assembly removal” on page 287.
7421
Repair information
288
To Next Page
Loading...
