6 Remove the four screws (B).
B
7 Disconnect the cables, and then remove the assembly.
Developer unit removal
1 Remove the standard bin base. See “Standard bin base removal” on page 389.
2 Remove the top front door. See “Top front door removal” on page 327.
3 Remove the bottom front door. See “Bottom front door removal” on page 327.
4 Remove the waste toner door mount. See “Waste toner door mount removal” on page 328.
5 Remove the toner agitator. See “Toner agitator removal” on page 335.
7421
Repair information
336
To Next Page
Loading...
