Sensor (3000-sheet tray feed) removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
3 Remove the front cover. See “3000-sheet tray front cover removal” on page 505.
4 Remove the left top cover. See “3000-sheet tray left top cover removal” on page 508.
5 Disconnect the cable (A).
6 Remove the screw (B), and then remove the bracket.
B
A
7 Remove the adhesive (C), and then remove the sensor.
C
7421
Repair information
512
To Next Page
Loading...
