3 Remove the screw (A), and then remove the bracket.
4 Remove the clip (B).
5 Remove the shaft, and then remove the actuator.
Sensor (3000-sheet tray set) removal
1 Remove the right cover. See “3000-sheet tray right cover removal” on page 505.
2 Remove the rear cover. See “3000-sheet tray rear cover removal” on page 506.
3 Remove the tray set sensor actuator. See “3000-sheet tray set sensor actuator removal” on page 515.
7421
Repair information
516
To Next Page
Loading...
