Lexmark MX912dxe - Second Transfer; Clean (Transfer Belt)

# Part
1 Erase LED
2 Cleaning blade
3 Photoconductor roller
Second transfer
The whole image from the transfer belt is transferred again, this time onto the paper. The paper, which is pressed
between the transfer belt and transfer roller, attracts the toner to its surface. As the paper moves up, a separator guide
prevents it from entering the top side of the transfer belt.
# Part
1 Transfer belt
2 Separator guide
3 Transfer roller
4 Paper
Clean (transfer belt)
Some residual toner stick to the surface of the transfer belt. To prevent contamination on the next image, a cleaning
blade scrapes off the toner from the transfer belt surface. Waste toner from the transfer belt and photoconductor is
transported to the waste toner bottle. The cycle (first transfer, second transfer, clean) repeats for the succeeding print
jobs.
7421
Appendix C: Theory of operation
745