4 Remove the assembly.
2 x 500-sheet tray 4 transport assembly removal
1 Remove the rear right cover. See “2 x 500-sheet tray rear right cover removal” on page 489.
2 Remove the jam access door. See “2 x 500-sheet tray jam access door removal” on page 488.
3 Remove the bottom right cover. See “2 x 500-sheet tray bottom right cover removal” on page 490.
4 Disconnect the two cables (A), and then remove the four screws (B).
5 Remove the assembly.
Note: The following illustration shows the tray 3 transport assembly. The same movements apply when
removing the tray 4 transport assembly.
7421
Repair information
491
To Next Page
Loading...
