Print section
Toner from the transfer belt is transferred to the paper. For more information, see “Second transfer” on page 745.
The rotation of the transfer belt and transfer roller is controlled by the motor (developer).
# Part
1 Motor (developer)
2 Fuser
3 Transfer roller
4 Transfer belt
After the second transfer, the paper is passed to the fuser. For more information, see “Fuse” on page 746.
The motor (fuser pressure) controls the pressure that is exerted on the paper. The motor (fuser) controls the movement
of the paper from the fuser to the exit section.
7421
Appendix C: Theory of operation
760
To Next Page
Loading...
