6 Disconnect the cable (A).
A
7 Remove the IHPS frame. See “IHPS frame removal” on page 360.
8 Remove the two screws (B), and then remove the fan.
B
Motor (toner cartridge) removal
1 Remove the scanner interface cable cover. See “Scanner interface cable cover removal” on page 344.
2 Remove the controller board access cover. See “Controller board access cover removal” on page 345.
3 Remove the engine board cover. See “Engine board cover removal” on page 346.
4 Remove the upper rear cover. See “Upper rear cover removal” on page 346.
7421
Repair information
362
To Next Page
Loading...
