Lexmark MX912dxe - X 500-Sheet Tray Rollers Removal; Sensor (2 X 500-Sheet Tray Paper Length) Removal

6 Align the notches on the link and cover, and then remove the link.
2 x 500-sheet tray rollers removal
1 Remove the tray inserts.
2 Open the jam access door.
3 Release the three clips (A), and then remove the rollers.
Sensor (2 x 500-sheet tray paper length) removal
1 Remove the tray inserts.
2 Disconnect the cable from the sensor.
7421
Repair information
479