3 Remove the three screws, and then remove the motor.
# Part
1 Motor (2 x 500‑sheet tray 3 feed)
2 Motor (2 x 500‑sheet tray 4 feed)
3 Motor (2 x 500‑sheet tray 4 transport)
4 Motor (2 x 500‑sheet tray 3 transport)
2 x 500-sheet tray controller board removal
1 Remove the rear cover. See “2 x 500-sheet tray rear cover removal” on page 483.
2 Disconnect all the cables from the board.
7421
Repair information
487
To Next Page
Loading...
