Action for Prompts
This gives you the option to allow the printer to resolve change prompt situations without requiring any user assistance.
1 Enter the Configuration menu, and then select Action for Prompts.
2 Select a setting.
3 Apply the changes.
Jobs on Disk
This setting allows you to delete buffered jobs from the printer hard disk.
1 Enter the Configuration menu, and then select Jobs on Disk.
2 Select a setting.
3 Apply the changes.
Disk Encryption
This setting controls whether the printer encrypts the information that it writes on the hard disk.
1 Enter the Configuration menu, and then select Disk Encryption.
2 Select a setting.
3 Apply the changes.
Font Sharpening
This setting sets a text point-size value below which the high‑frequency screens are used when printing font data.
1 Enter the Configuration menu, and then select Font Sharpening.
2 Select a setting.
3 Apply the changes.
Require Standby
This setting allows you to enable the Standby Mode.
1 Enter the Configuration menu, and then select Require Standby.
2 Select a setting.
3 Apply the changes.
7421
Service menus
234
To Next Page
Loading...
