4 Remove the screw (A), and then move away the switch.
A
5 Disconnect the four cables and remove the switch.
Installation note: Red connectors are on top, while white connectors are at the bottom. Black cables are on the
right, while white cables are on the left.
Sensor (top front door) removal
1 Remove the top front door. See “Top front door removal” on page 327.
2 Remove the bottom front door. See “Bottom front door removal” on page 327.
3 Remove the waste toner door mount. See “Waste toner door mount removal” on page 328.
7421
Repair information
331
To Next Page
Loading...
