5 Remove the five screws (A).
6 Disconnect the cable (B), and then remove the sensor.
2 x 500-sheet tray 3 transport belts and gears removal
1 Remove the rear right cover. See “2 x 500-sheet tray rear right cover removal” on page 489.
2 Remove the jam access door. See “2 x 500-sheet tray jam access door removal” on page 488.
3 Remove the bottom right cover. See “2 x 500-sheet tray bottom right cover removal” on page 490.
4 Remove the tray 3 transport assembly. See “2 x 500-sheet tray 3 transport assembly removal” on page 490.
5 Remove the tray 4 transport assembly. See “2 x 500-sheet tray 4 transport assembly removal” on page 491.
7421
Repair information
495
To Next Page
Loading...
