3 Remove the front inner cover. See “Front inner cover removal” on page 328.
4 Remove the waste toner door mount. See “Waste toner door mount removal” on page 328.
5 Remove the left cover. See “Left cover removal” on page 272.
6 Remove the rear left cover. See “Rear left cover removal” on page 273.
7 Remove the main power supply shield. See “Main power supply shield removal” on page 273.
8 Remove the main power supply fan. See “Main power supply fan removal” on page 274.
9 Remove the main power supply. See “Main power supply removal” on page 275.
10 Disconnect the cables, and then remove the two screws (A).
11 Remove the board.
7421
Repair information
277
To Next Page
Loading...
