# Part
1 Sensor (elevator level)
2 Pick roller
3 Elevator plate
Paper feed and transport
The pick roller pushes the topmost sheet to the feed roller. The separator roller makes sure that only one sheet is fed
at a time.
The paper is fed from the pick assembly to the transport rollers before going to the registration section. For more
information, see
“Registration section” on page 759.
The motor (feed) controls the pick, feed, and separator rollers. The motor (transport) drives the transport roller to pass
the paper to the tray 2 transport roller. The sensor (feed) detects when paper passes through the transport roller.
# Part
1 Sensor (feed)
2 Transport roller
3 Pick assembly
4 Pick roller
5 Separator roller
6 Feed roller
7421
Appendix C: Theory of operation
758
To Next Page
Loading...
