shadow images 52
skewed print 54
solid black pages 50
streaked vertical lines appear on prints 55
toner smear 57
toner specks 58
print quality, troubleshooting
cleaning the charger 537
cleaning the printhead lens 537
printer
basic model 529
fully configured 529
printer configurations 529
printer control panel
indicator light 207
Sleep button light 207
Printer had to restart. Last job may be incomplete. 127
printer messages
[x] maintenance kit very low [80.xy] 126
[x]‑page jam, clear manual feeder. [200.xx] 64
[x]‑page jam, open door C and clear all jammed
media. [2yy.xx] 71
[x]‑page jam, open door D and clear all jammed
media. [24y.xx] 82
[x]‑page jam, press latch at area E to open ADF’s top
cover. [28y.xx] 107
[x]‑page jam, slide the 3000‑sheet tray and open door
C. [2yy.xx] 73
[x]‑page jam, slide the 3000‑sheet tray and open door
D. [24y.xx] 93
Cartridge low [88.xy] 119
Cartridge nearly low [88.xy] 119
Cartridge very low [88.xy] 119
Change [paper source] to [custom string] load
[orientation] 119
Change [paper source] to [custom type name] load
[orientation] 119
Change [paper source] to [paper size] load
[orientation] 119
Change [paper source] to [paper type] [paper size]
load [orientation] 120
Close door [x] 120
Complex page, some data may not have printed
[39] 120
Configuration change, some held jobs were not
restored [57] 120
Defective flash detected [51] 120
Disk full [62] 120
Disk full, scan job canceled 121
Disk must be formatted for use in this device 121
Disk near full. Securely clearing disk space. 121
Empty the hole punch box 121
Error reading USB drive. Remove USB. 121
Error reading USB hub. Remove hub. 121
Fax memory full 121
Fax partition inoperative. Contact system
administrator. 122
Fax server 'To Format' not set up. Contact system
administrator. 122
Fax Station Name not set up. Contact system
administrator. 122
Fax Station Number not set up. Contact system
administrator. 122
Incorrect paper size, open [paper source] [34] 122
Insert hole punch box 122
Insert Tray [x] 123
Insufficient memory for Flash Memory Defragment
operation [37] 123
Insufficient memory to collate job [37] 123
Insufficient memory to support Resource Save feature
[35] 123
Insufficient memory, some Held Jobs were deleted
[37] 123
Insufficient memory, some held jobs will not be
restored [37] 123
Insufficient space between paper stacks in Tray 3 123
Load [paper source] with [custom string] [paper
orientation] 124
Load [paper source] with [custom type name [paper
orientation] 124
Load [paper source] with [paper size] [paper
orientation] 124
Load [paper source] with [paper type] [paper size]
[paper orientation] 124
Load Multipurpose Feeder with [custom string]
[paper orientation] 124
Load Multipurpose Feeder with [custom type name]
[paper orientation] 125
Load Multipurpose Feeder with [paper size] [paper
orientation] 125
Load Multipurpose Feeder with [paper type] [paper
size] [paper orientation] 125
Load staples 125
Load staples [G11, G12] 126
Memory full [38] 126
Memory full, cannot print faxes 126
Memory full, cannot send faxes 126
Network [x] software error [54] 126
No analog phone line connected to modem, fax is
disabled. 126
Not enough free space in flash memory for resources
[52] 127
Open door H and remove paper from beneath area
H10 127
7421
Index
778
To Next Page
Loading...
