Driving
5.1 Before driving
5 - 6 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
22. Check the electrical system; Ã p. 5 - 7.
23. Check the fluid supply:
–
à Fuel tank, p. 4 - 5,
–
à AdBlue tank, p. 4 - 7.
24. Check the compressed-air system and the brakes;
à p. 5 - 10.
25. Check that all switching states for on-road driving are set, and that the
corresponding symbols are shown:
– Suspension switched on;
à p. 5 - 17,
– Longitudinal and transverse differential locks switched off;
à p. 5 - 51,
– Separate steering switched off – the symbol for on-road driving is dis-
played;
à p. 5 - 63,
– On-road level is set
; Ã p. 5 - 54.
Establish the switching states for on-road driving if necessary.
To Next Page
Loading...
Need help?
General
