Crane operation
11.6 Settings and displays for crane operation
11 - 122 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
11.6.2 Setting the idling speed
à Setting the idling speed, p. 10 - 9
11.6.3 Adjusting the wiper stroke interval of the windscreen wiper
You can set a value between 3 and 30 seconds for the front and roof window
wiper stroke interval.
H
The higher the selected value is, the longer the pauses between the strokes
of the wiper are.
• Open the Datalogger (1) menu.
• The displays (1) and (2) show the current
values.
• Select and confirm the symbol:
• Select and confirm the symbol (7).
Symbol is orange – input on.
To cancel the input – press button (9) once.
• Change the value using buttons (8) or (10).
• Confirm the changed value.
3 Interval for windscreen wiper
4 Interval for roof window wiper
1 For the windscreen wiper – symbol (5)
displayed
2 For the roof window wiper – Symbol (6)
displayed
To Next Page
Loading...
Need help?
General
