Malfunctions during crane operation
14.6 Hydraulic emergency operation with the hand pump
14 - 50 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
14.6.2 Switching over the crane's hydraulic system
H
If you wish to move the hoist during emergency operation, you can open
tap 4 at the beginning of the operation – as described in this section – this
leads to the elimination of this step later during emergency operation. This
does not affect the emergency operation of the other power units.
for crane operation
• Open the valve (4) and secure it using the
lock (1).
For emergency operation
• Remove the lock (1) and close the valve (4).
To Next Page
Loading...
Need help?
General
