Driving with a rigged truck crane
13.4 Driving from the driver's cab
Operating manual 3 302 736 en 13 - 11
GMK4090
xx.xx.xxxx
13.4 Driving from the driver's cab
13.4.1 Preparing to drive
Transmission
• In order to
–for forward travel in position D,
– drive backwards, shift to position R. An acoustic signal is given with
additional equipment.
Switching on sep-
arate steering
When driving the rigged truck crane, the separate steering must be
switched on.
• Select and confirm the symbol
Connections If required, you can
– Switch on the longitudinal differential locks;
à p. 5 - 51
– Switch on the transverse differential locks;
à p. 5 - 51
G
Risk of accidents when driving the truck crane from the driver's cab with a
lifted load
With a lifted load, drive the truck crane only from the crane cab. You must
be able to carry out crane movements in an emergency at all times.
S
Risk of damage to the steering linkage
Always switch on separate steering before driving the rigged truck crane
and steer the truck crane only when it is rolling.
The steering linkage can be damaged if separate steering is switched off or
if you steer the vehicle while it is stationary.
1 – for Manual separate steering or
2 – Separate steering automatic for driving around corners or
3 – separate steering automatic for crab travel.
To Next Page
Loading...
Need help?
General
