Driving
5.3 Driving the truck crane and switching it off
5 - 40 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
5.3.3 Temposet
You can use Temposet to limit the maximum speed.
Switching on You can switch on Temposet only at speeds greater than 15 km/h (9 mph).
• Press the button (1) once.
Temposet is now switched on. The symbol (2) is displayed in the “Driving”
display.
The current speed is taken as the maximum speed.
You can exceed the speed by pressing the accelerator as far down as it will
go (kick-down). The Temposet limits the speed again only once you release
the accelerator and press it again.
Increasing/reducing the maximum speed
– Increase with (1)
– Reduce with (2)
• Press the corresponding button until the desired speed is reached
or
• Press the corresponding button once. The speed will increase/decrease
by 1.0 km/h (0.6 mph).
Switching off
• Press the button (1) once.
The Temposet is now switched off.
To Next Page
Loading...
Need help?
General
