Starting/switching off the engine – for crane operation
10.2 Starting the engine – from the crane cab
10 - 6 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
10.2.4 Comparison of switching states
When the ignition is switched on, the switching states of the differential
locks and the separate steering are compared.
Differential locks
The state last saved is retrieved.
In the
Driving menu, the corresponding sym-
bols (1) are shown and the electronics system
triggers the switching operations.
Steering
When you switch the ignition on, the steering
is always set to
On-road driving (2), irrespective
of what setting was last saved.
10.2.5 Display – setting the brightness
• Open the Settings (1) menu.
This is operated in the same way as in the driver's cab;
à p. 4 - 12.
To Next Page
Loading...
Need help?
General
